This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time. We are going to produce the 3D milling mechanical as long as the budget and the time allow. The University of Halmstad will have completed drawings and all of the documentations of the project to complete the 3D milling when the time is right.