A planar patch antenna array has been made for radar interferometry. The antenna array consists of 32 rectangular patches on a ceramic loaded teflon substrate. The patches are individually coupled to the microwave electronics in two orthogonal circular polarizations. The radar interferometer is intended for topographic imaging in industrial environment, in this case, a blast furnace producing hot metal for the steel and metal industry. Ordinary imaging techniques with IR or visible radiation are not possible to use due to high temperatures, scattering from dust and particles. A model of blast furnace burden material surface was measured and detected.
Copyright © 2007 IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Halmstads's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.