On the feasibility of Integrated Sensing and Communication (ISAC) on bluetooth and Wi-fi
2026 (English)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE credits
Student thesis
Abstract [en]
The study thesis is to determine the possibility of tracking humanmovement in an indoor space using exclusively wireless signals as measurements, received by low-cost ESP32-C3 microcontrollers. The results are two basic scalars that can be found on commodity hardwareknown as the Received Signal Strength Indicator (RSSI) based on thecommunication of the Bluetooth Low Energy (BLE) and the distance estimates based on the Wi-Fi Fine Time Measurement (FTM). Although guided by the vision of the concept of Integrated Sensing andCommunication (ISAC), the piece conformists this paradigm to a miniature of a microcontroller in size, using the non-abundant hardwareand relative low-power of lacking computational capabilities.
A prototype system was designed with four ESP32-C3 nodes set totwo independent subsystems namely: a BLE subsystem which wouldsense the RSSI and Wi-Fi subsystem which would range FTM. Theaverages of the RSSI and the FTM distance were recorded block-wisewithin a fixed indoor room on a Python-based logging pipeline running on a personal computer as the presence and movement of oneperson varied systematically. An experimental design was to be usedinvolving a sequence of stationary and motion situations such as anempty room, a motionless person standing in different positions, andthe multiple walking paths which crossed or visited the inter-nodespace.
The findings show that there is qualitative distinction between thestationary and the motion conditions in both RSSI and FTM. Eachmetric had variation in a narrow range around a constant value inboth the empty-room and stationary-person conditions. On the otherhand, the motion left behind significant temporal changes- such asdips, spikes, and sustained changes compared with baseline, indicating that it is sufficient that simple threshold based rules based ondeviations with the baseline can be used to distinguish most motionperiods and no-motion periods in the considered setup. The experiments also show that RSSI and FTM provide complementary data,and that combining them, they provide a stronger depiction of channel dynamics than either of them used
independently. Although there are drawbacks related to the reliance on the environment, single-room testing, and qualitative analysis, the resultssupport the possibility of the creation of a simple, ISAC-inspired motion detector using the help of the off-the-shelf ESP32-C3 boards andbasic wireless measurements.
Abstract [sv]
Studiens avhandling syftar till att fastställa möjligheten att spåra mänskliga rörelser inomhus med hjälp av enbart trådlösa signaler som mätningar, mottagna avbilliga ESP32-C3 mikrokontroller. Resultaten är två grundläggande skalärer somkan hittas på vanlig hårdvara, känd som Received Signal Strength Indicator (RSSI), baserad på kommunikationen via Bluetooth Low Energy (BLE) och avstånduppskattningar baserade på Wi-Fi Fine Time Measurement (FTM). Även om arbetet vägleds av visionen bakom konceptet Integrated Sensing and Communication(ISAC), anpassar det detta paradigm till en miniatyr av en mikrokontroller i storlek, med hjälp av den begränsade hårdvaran och den relativt låga strömförbrukningen på grund av bristande beräkningskapacitet.
Ett prototyp system designades med fyra ESP32-C3 noder inställda på två oberoende delsystem, nämligen: ett BLE-delsystem som skulle känna av RSSI och ettWi-Fi-delsystem som skulle mäta avståndet FTM. Medelvärdet för RSSI och FTMavståndet registrerades blockvis i ett fast inomhus rum på en Python-baserad loggnings pipeline som kördes på en persondator, då en persons närvaro och rörelsevarierade systematiskt. En experimentell design skulle användas som involveradeen sekvens av stationära och rörelsesituationer, såsom ett tomt rum, en orörligperson som stod i olika positioner och de flera gångvägarna som korsade ellerbesökte utrymmet mellan noderna.
Resultaten visar att det finns en kvalitativ skillnad mellan stationära och rörelse förhållanden i både RSSI och FTM. Varje mätvärde hade variation inom ettsmalt intervall runt ett konstant värde i både förhållandena med tomt rum och förhållandena med stationär person. Å andra sidan lämnade rörelsen efter sig betydande tidsmässiga förändringar - såsom dippar, toppar och ihållande förändringarjämfört med baslinjen - vilket indikerar att det är tillräckligt att enkla tröskel baserade regler baserade på avvikelser från baslinjen kan användas för att skilja deflesta rörelse perioder och perioder utan rörelse i den betraktade uppställningen.Experimenten visar också att RSSI och FTM ger kompletterande data, och att degenom att kombinera dem ger en starkare bild av kanal dynamiken än någon avdem användes oberoende av varandra.
Även om det finns nackdelar relaterade till beroendet av miljön, testning iett enda rum och kvalitativ analys, stöder resultaten möjligheten att skapa enenkel, ISAC-inspirerad rörelsedetektor med hjälp av de standardiserade ESP32-C3 korten och grundläggande trådlösa mätningar
Place, publisher, year, edition, pages
2026. , p. 68
Keywords [en]
Wirelessly sensing, device free localization, motion sensing, RSSI, Bluetooth Low energy (BLE), Wi-Fi Fine Time Measurement (FTM), ESP32-C3, Integrated Sensing and Communication (ISAC), indoor positioning
National Category
Signal Processing Computer Engineering
Identifiers
URN: urn:nbn:se:hh:diva-58294OAI: oai:DiVA.org:hh-58294DiVA, id: diva2:2036484
Subject / course
Computer science and engineering
Educational program
Computer Science and Engineering, 300 credits
Presentation
2025-12-17, F413, Kristian IV: 3, Halmstad, 10:40 (English)
Supervisors
Examiners
2026-02-092026-02-072026-02-09Bibliographically approved