In this paper, we investigate the impact of adversarial attacks on identity encoders within a realistic de-identification framework. Our experiments show that the transferability of attacks transfers from an external surrogate model to the system model (e.g., CosFace to ArcFace) allows the adversary to cause identity information to leak in a sufficiently sensitive face recognition system. We present experimental evidence and propose strategies to mitigate this vulnerability. Specifically, we show how fine-tuning on adversarial examples helps to mitigate this effect for distortion-based attacks (i.e., snow, fog, etc.), while a simple low-pass filter can attenuate the effect of adversarial noise without affecting the de-identified images. Our mitigation results in a de-identification system that preserves its functionality while being significantly more robust to adversarial noise. © 2025 IEEE.

Machine learning (ML) models are increasingly getting attention in predicting pavement maintenance methods to improve decision-making. This study investigates the use of ML at the municipal level to predict the street pavement condition index (PCI) rating over a 4-year span. Several supervised learning models, namely linear regression (LR), random forest (RF), and neural network (NN), were applied to the visually assessed pavement condition data of Skellefteå municipality, Sweden. Pavement distress, pavement age, and traffic data were used in several combinations to evaluate and compare the performance of the models. The RF model was based on paired variables of pavement age and pavement distress data. The results were comparatively accurate with R2=0.59 and Spearman's coefficient=0.74 for residential streets in the model testing stage. Similarly, for main, collector, and industrial (MCI) streets, the RF model, based on pavement age and traffic variables, performed best with R2=0.79 and Spearman's coefficient=0.88 during the model testing stage. The importance of input variables varies with the level of the model's sophistication and pavement performance goal; however, pavement age is the dominant variable. The prediction models can be useful in effectively managing street networks among municipalities, even those with scarce resources. © 2025 ASCE.

Artificial Intelligence (AI) can enable the development of next-generation autonomous safety-critical systems in which Machine Learning (ML) algorithms learn optimized and safe solutions. AI can also support and assist human safety engineers in developing safety-critical systems. However, reconciling both cutting-edge and state-of-the-art AI technology with safety engineering processes and safety standards is an open challenge that must be addressed before AI can be fully embraced in safety-critical systems. Many works already address this challenge, resulting in a vast and fragmented literature. Focusing on the industrial and transportation domains, this survey structures and analyzes challenges, techniques, and methods for developing AI-based safety-critical systems, from traditional functional safety systems to autonomous systems. AI trustworthiness spans several dimensions, such as engineering, ethics and legal, and this survey focuses on the safety engineering dimension. © 2024 Copyright held by the owner/author(s).

Millions of vehicles are transported every year, tightly parked in vessels or boats. To reduce the risks of associated safety issues like fires, knowing the location of vehicles is essential, since different vehicles may need different mitigation measures, e.g. electric cars. This work is aimed at creating a solution based on a nano-drone that navigates across rows of parked vehicles and detects their license plates. We do so via a wall-following algorithm, and a CNN trained to detect license plates. All computations are done in real-time on the drone, which just sends position and detected images that allow the creation of a 2D map with the position of the plates. Our solution is capable of reading all plates across eight test cases (with several rows of plates, different drone speeds, or low light) by aggregation of measurements across several drone journeys. © 2024, The Author(s), under exclusive license to Springer Nature Switzerland AG.

In this work, we present a new single-stage method for subject agnostic face swapping and identity transfer, named FaceDancer. We have two major contributions: Adaptive Feature Fusion Attention (AFFA) and Interpreted Feature Similarity Regularization (IFSR). The AFFA module is embedded in the decoder and adaptively learns to fuse attribute features and features conditioned on identity information without requiring any additional facial segmentation process. In IFSR, we leverage the intermediate features in an identity encoder to preserve important attributes such as head pose, facial expression, lighting, and occlusion in the target face, while still transferring the identity of the source face with high fidelity. We conduct extensive quantitative and qualitative experiments on various datasets and show that the proposed FaceDancer outperforms other state-of-the-art networks in terms of identityn transfer, while having significantly better pose preservation than most of the previous methods. © 2023 IEEE.

In this paper, we present a new approach for facial anonymization in images and videos, abbreviated as FIVA. Our proposed method is able to maintain the same face anonymization consistently over frames with our suggested identity-tracking and guarantees a strong difference from the original face. FIVA allows for 0 true positives for a false acceptance rate of 0.001. Our work considers the important security issue of reconstruction attacks and investigates adversarial noise, uniform noise, and parameter noise to disrupt reconstruction attacks. In this regard, we apply different defense and protection methods against these privacy threats to demonstrate the scalability of FIVA. On top of this, we also show that reconstruction attack models can be used for detection of deep fakes. Last but not least, we provide experimental results showing how FIVA can even enable face swapping, which is purely trained on a single target image. © 2023 IEEE.

Deep Learning (DL) techniques are at the heart of most future advanced software functions in Critical Autonomous AI-based Systems (CAIS), where they also represent a major competitive factor. Hence, the economic success of CAIS industries (e.g., automotive, space, railway) depends on their ability to design, implement, qualify, and certify DL-based software products under bounded effort/cost. However, there is a fundamental gap between Functional Safety (FUSA) requirements on CAIS and the nature of DL solutions. This gap stems from the development process of DL libraries and affects high-level safety concepts such as (1) explainability and traceability, (2) suitability for varying safety requirements, (3) FUSA-compliant implementations, and (4) real-time constraints. As a matter of fact, the data-dependent and stochastic nature of DL algorithms clashes with current FUSA practice, which instead builds on deterministic, verifiable, and pass/fail test-based software. The SAFEXPLAIN project tackles these challenges and targets by providing a flexible approach to allow the certification - hence adoption - of DL-based solutions in CAIS building on: (1) DL solutions that provide end-to-end traceability, with specific approaches to explain whether predictions can be trusted and strategies to reach (and prove) correct operation, in accordance to certification standards; (2) alternative and increasingly sophisticated design safety patterns for DL with varying criticality and fault tolerance requirements; (3) DL library implementations that adhere to safety requirements; and (4) computing platform configurations, to regain determinism, and probabilistic timing analyses, to handle the remaining non-determinism. © 2023 EDAA.

Platooning refers to a group of vehicles that--enabled by wireless vehicle-to-vehicle (V2V) communication and vehicle automation--drives with short inter-vehicular distances. Before its deployment on public roads, several challenging traffic situations need to be handled. Among the challenges are cut-in situations, where a conventional vehicle--a vehicle that has no automation or V2V communication--changes lane and ends up between vehicles in a platoon. This paper presents results from a simulation study of a scenario, where a conventional vehicle, approaching from an on-ramp, merges into a platoon of five cars on a highway. We created the scenario with four platooning gaps: 15, 22.5, 30, and 42.5 meters. During the study, the conventional vehicle was driven by 37 test persons, who experienced all the platooning gaps using a driving simulator. The participants' opinions towards safety, comfort, and ease of driving between the platoon in each gap setting were also collected through a questionnaire. The results suggest that a 15-meter gap prevents most participants from cutting in, while causing potentially dangerous maneuvers and collisions when cut-in occurs. A platooning gap of at least 30 meters yield positive opinions from the participants, and facilitating more smooth cut-in maneuvers while less collisions were observed.

Automatic detection of flying drones is a key issue where its presence, especially if unauthorized, can create risky situations or compromise security. Here, we design and evaluate a multi-sensor drone detection system. In conjunction with standard video cameras and microphone sensors, we explore the use of thermal infrared cameras, pointed out as a feasible and promising solution that is scarcely addressed in the related literature. Our solution integrates a fish-eye camera as well to monitor a wider part of the sky and steer the other cameras towards objects of interest. The sensing solutions are complemented with an ADS-B receiver, a GPS receiver, and a radar module. However, our final deployment has not included the latter due to its limited detection range. The thermal camera is shown to be a feasible solution as good as the video camera, even if the camera employed here has a lower resolution. Two other novelties of our work are the creation of a new public dataset of multi-sensor annotated data that expands the number of classes compared to existing ones, as well as the study of the detector performance as a function of the sensor-to-target distance. Sensor fusion is also explored, showing that the system can be made more robust in this way, mitigating false detections of the individual sensors. © 2022 by the authors.

The use of small and remotely controlled unmanned aerial vehicles (UAVs), referred to as drones, has increased dramatically in recent years, both for professional and recreative purposes. This goes in parallel with (intentional or unintentional) misuse episodes, with an evident threat to the safety of people or facilities [1]. As a result, the detection of UAV has also emerged as a research topic [2]. Most of the existing studies on drone detection fail to specify the type of acquisition device, the drone type, the detection range, or the employed dataset. The lack of proper UAV detection studies employing thermal infrared cameras is also acknowledged as an issue, despite its success in detecting other types of targets [2]. Beside, we have not found any previous study that addresses the detection task as a function of distance to the target. Sensor fusion is indicated as an open research issue as well to achieve better detection results in comparison to a single sensor, although research in this direction is scarce too [3–6]. To help in counteracting the mentioned issues and allow fundamental studies with a common public benchmark, we contribute with an annotated multi-sensor database for drone detection that includes infrared and visible videos and audio files. The database includes three different drones, a small-sized model (Hubsan H107D+), a medium-sized drone (DJI Flame Wheel in quadcopter configuration), and a performance-grade model (DJI Phantom 4 Pro). It also includes other flying objects that can be mistakenly detected as drones, such as birds, airplanes or helicopters. In addition to using several different sensors, the number of classes is higher than in previous studies [4]. The video part contains 650 infrared and visible videos (365 IR and 285 visible) of drones, birds, airplanes and helicopters. Each clip is of ten seconds, resulting in a total of 203,328 annotated frames. The database is complemented with 90 audio files of the classes drones, helicopters and background noise. To allow studies as a function of the sensor-to-target distance, the dataset is divided into three categories (Close, Medium, Distant) according to the industry-standard Detect, Recognize and Identify (DRI) requirements [7], built on the Johnson criteria [8]. Given that the drones must be flown within visual range due to regulations, the largest sensor-to-target distance for a drone in the dataset is 200 m, and acquisitions are made in daylight. The data has been obtained at three airports in Sweden: Halmstad Airport (IATA code: HAD/ICAO code: ESMT), Gothenburg City Airport (GSE/ESGP) and Malmö Airport (MMX/ESMS). The acquisition sensors are mounted on a pan-tilt platform that steers the cameras to the objects of interest. All sensors and the platform are controlled with a standard laptop vis a USB hub. © 2021