Basenhetskoncept för projektordukar
2012 (Swedish)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE credits
Student thesis
Abstract [en]
Our thesis is conducted in collaboration with Draper Europe AB in Halmstad.
The goal of the project has been to construct a baseline concept for the instaling of aprojector screen. Draper Europe AB, in the curent situation, have several kinds of fabrics and designs on their sceens and the cases they are in. Today if you select a screen you can´t chose the design and function of the sceens case.
The arrangement of the components inside the cases was to be constructed so the assembler simply could move them to different cases. To make it even easier for the assembler and to save time, the desire of less component was mentioned. Another problem that needed to be solved was the mounting of the projectionscreen at the customer place. Today it is almost impossible for one person to install a screen.
We have chosen to use the ”Fredy Olsson method” as used in several other construction projects. Based on this method and with the help of several other design methods we have developed some propositions. The propositions has then been developed and improved to finally be designed in Catia V5.
Abstract [sv]
Examensarbete är utfört i samarbete med Draper Europe AB i Halmstad. Det harsyftat till att konstruera ett basenhetskoncept för upphängning av projektorduk.
I dagsläget har företaget flera olika sorters dukar och utseende på fodralen som de ligger i. Om kunden väljer en viss duk kan de inte välja bland alla fodral.
Komponenterna inne i fodralet ska ordnas så att de lätt kan flyttas till ett annat fodral. För att göra det enklare för den som monterar de olika delarna var det önskvärt med ett färre antal komponenter. Ett annat problem som skulle lösas var upphängningen av duken hos kund. Företaget önskar att upphängningen ska kunna skötas av en person, vilket i dag är nästan omöjligt. Det önskas även en nydesign på fodralet.
Metoden som valts för detta konstruktionsprojekt är Fredy Olssons metod. Utöverdetta har flera designverktyg används vid utformningen av ett nytt utseende påfodralet. I enlighet med Fredy Olssons metod genomfördes en konkurrensanalys samt en marknadsundersökning för att sedan ta fram ett antal principförslag. Dessa har därefter bearbetats och förbättrats för att slutligen konstruerats i CatiaV5 .
Place, publisher, year, edition, pages
2012.
National Category
Mechanical Engineering
Identifiers
URN: urn:nbn:se:hh:diva-17753OAI: oai:DiVA.org:hh-17753DiVA, id: diva2:529129
Uppsok
Technology
Supervisors
Examiners
2012-06-212012-05-292012-06-21Bibliographically approved