IR-Länk 2005 (Swedish)Independent thesis Basic level (degree of Bachelor)Student thesis

Abstract [sv]

The purpose of this project is to develop a prototype to an IR receiver. The purpose of the receiver is to be able to receive sound direct from a transmitter that is connected to a microphone or a similar device and thereby minimise the background noise. This prototype shall be compatible with existing systems found on the market today. The most common technique for transmitting sound by IR light today is frequency modulation and it is also used in this project. The receiver is designed for low voltage and current use. In this project the transmitter that is used is an existing product and the receiver has been constructed to receive its signal. To conserve battery life it is desirable that the receiver draws a current less than 2mA. This requirement has not been fulfilled, besides that the prototype works satisfactorily.

Place, publisher, year, edition, pages

2005.

Keywords [sv]

IR mottagare

Identifiers

URN: urn:nbn:se:hh:diva-12908Local ID: U11976OAI: oai:DiVA.org:hh-12908DiVA, id: diva2:368075

Uppsok

Technology

Note

Denna uppsats kan beställas från arkivet / This paper can be ordered from the archive. Kontakta / Contact: arkivet@hh.seAvailable from: 2010-11-09 Created: 2010-11-09Bibliographically approved

Open Access in DiVA

No full text in DiVA

By organisation

School of Information Science, Computer and Electrical Engineering (IDE)

Search outside of DiVA

GoogleGoogle ScholarTotal: 101 hits