Positionering av svetsfogar med Visionsystem 2004 (Swedish)Independent thesis Basic level (degree of Bachelor)Student thesis

Abstract [sv]

The purpose of this project is to make an assembly line more effective by implementing vision technology. The task was to localize a weld on a tinplate can and then rotate it to the correct position as fast as possible. After the rotation a check should be made to ensure that the can is in the correct position. The time requirements are easily met, even if the servo is run at a low speed we are almost twice as fast as we had to be. Our system also has great benefits when it comes to safety of results and precision.

Place, publisher, year, edition, pages

2004.

Keywords [sv]

visionsystem smartcamera DVT

Identifiers

URN: urn:nbn:se:hh:diva-11807Local ID: U10837OAI: oai:DiVA.org:hh-11807DiVA, id: diva2:366946

Uppsok

Technology

Note

Denna uppsats kan beställas från arkivet / This paper can be ordered from the archive. Kontakta / Contact: arkivet@hh.seAvailable from: 2010-11-09 Created: 2010-11-09Bibliographically approved

Open Access in DiVA

No full text in DiVA

By organisation

School of Information Science, Computer and Electrical Engineering (IDE)

Search outside of DiVA

GoogleGoogle ScholarTotal: 61 hits