A remote LabVIEW measurement control system 2003 (English)Independent thesis Basic level (degree of Bachelor)Student thesis

Abstract [en]

In the early days of laboratory measurements, logging, controlling and surveillance had to be done by manual setup and reading of the measurement devices. Today, there is software that enables this to be done from a personal computer connected to the measurement process. There is also software that enables the user to fully control the measurement devices remotely over the Internet. This thesis presents tests and implementations that verify and evaluate these abilities, using National Instruments’ LabVIEW 6.1. To get an overview of the measurement process, an image acquisition device, e.g. a web camera, could be added to the process. As there is no free support for image acquisition devices in LabVIEW, a method for implementing a web camera, using modified freeware is also presented in this thesis.

Place, publisher, year, edition, pages

2003.

Keywords [en]

labview, instrumentstyrning, webcamera

Identifiers

URN: urn:nbn:se:hh:diva-11111Local ID: U10102OAI: oai:DiVA.org:hh-11111DiVA, id: diva2:366240

Uppsok

Technology

Note

Denna uppsats kan beställas från arkivet / This paper can be ordered from the archive. Kontakta / Contact: arkivet@hh.seAvailable from: 2010-11-09 Created: 2010-11-09Bibliographically approved

Open Access in DiVA

No full text in DiVA

By organisation

School of Information Science, Computer and Electrical Engineering (IDE)

Search outside of DiVA

GoogleGoogle ScholarTotal: 103 hits