Antennmätstation 2003 (Swedish)Independent thesis Basic level (degree of Bachelor)Student thesis

Abstract [sv]

ABSTRACT The objective with this graduate work is to build an apparatus to measure the signal power from a Bluetooth unit. This was on the order from Free2Move AB. The station is built up around three units, transmitter, receiver and controller. Both the transmitter and the receiver are connected to the controller, which is a PC. The station is controlled by an interface on the PC. When the program is started the transmitter is rotated step by step. Between each step the signal power from the transmitter is checked, through the receiver. This gives the characteristic of the transmitter antenna all around. The measured data is saved into a file for further analysis. In the saved file there is also some relevant information about the object of measurement, i.e. date, object name and location.

Place, publisher, year, edition, pages

2003.

Keywords [sv]

signal power Bluetooth

Identifiers

URN: urn:nbn:se:hh:diva-10788Local ID: U5899OAI: oai:DiVA.org:hh-10788DiVA, id: diva2:365912

Uppsok

Technology

Note

Denna uppsats kan beställas från arkivet / This paper can be ordered from the archive. Kontakta / Contact: arkivet@hh.seAvailable from: 2010-11-09 Created: 2010-11-09Bibliographically approved

Open Access in DiVA

No full text in DiVA

By organisation

School of Information Science, Computer and Electrical Engineering (IDE)

Search outside of DiVA

GoogleGoogle ScholarTotal: 54 hits