Sandwichelement i betong med tunn, fiberarmerad ytterskiva 2001 (Swedish)Independent thesis Basic level (degree of Bachelor)Student thesis

Abstract [sv]

Abstract This project have been done by two students at the Construction Engineering Program at Halmstad University, in co-operation with Abetong Precon in Falkenberg, which is a large producer of prefabricated concrete-elements. The purpose with the report was to develop a sandwich-element with a thin, fibrereinforced exterior layer of concrete. The advantages will be both economical and practical, as the weight of the elements will decrease, and the amount of material will also be reduced. A new type of anchorage-system has been introduced due to limits for using traditional wire-mesh in the exterior layer. The construction has been tested in the Building Laboratory at Halmstad Univerity and also at the concrete-factory, with a good result. These tests showed that the construction has enough strength, and that there is a good possibility to produce a sandwich-element with considerable decreased thickness of the exterior concrete-layer.

Place, publisher, year, edition, pages

2001.

Keywords [sv]

sandwichelement, betong, fiberarmering, ytterskiva, förankringssystem

Identifiers

URN: urn:nbn:se:hh:diva-9469Local ID: U4067OAI: oai:DiVA.org:hh-9469DiVA, id: diva2:364568

Uppsok

Technology

Note

Denna uppsats kan beställas från arkivet / This paper can be ordered from the archive. Kontakta / Contact: arkivet@hh.seAvailable from: 2010-11-09 Created: 2010-11-09Bibliographically approved

Open Access in DiVA

No full text in DiVA

By organisation

School of Business and Engineering (SET)

Search outside of DiVA

GoogleGoogle ScholarTotal: 122 hits