hh.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Using multicoloured halftone screens for offset print quality monitoring
Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), Halmstad Embedded and Intelligent Systems Research (EIS), Intelligenta system (IS-lab).
2005 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

In the newspaper printing industry, offset is the dominating printing method and the use of multicolour printing has increased rapidly in newspapers during the last decade. The offset printing process relies on the assumption that an uniform film of ink of right thickness is transferred onto the printing areas. The quality of reproduction of colour images in offset printing is dependent on a number of parameters in a chain of steps and in the end it is the amount and the distribution of ink deposited on the substrate that create the sensation and thus the perceived colours. We identify three control points in the offset printing process and present methods for assessing the printing process quality in two of these points:

• Methods for determining if the printing plates carry the correct image

• Methods for determining the amount of ink deposited onto the newsprint

A new concept of colour impression is introduced as a measure of the amount of ink deposited on the newsprint. Two factors contribute to values of the colour impression, the halftone dot-size and ink density. Colour impression values are determined on gray-bars using a CCD-camera based system. Colour impression values can also be determined in an area containing an arbitrary combination of cyan magenta and yellow inks. The correct amount of ink is known either from a reference print or from prepress information. Thus, the deviation of the amount of ink can be determined that can be used as control value by a press operator or as input to a control system.

How a closed loop controller can be designed based on the colour impression values is also shown.

It is demonstrated that the methods developed can be used for off-line print quality monitoring and ink feed control, or preferably in an online system in a newspaper printing press.

Ort, förlag, år, upplaga, sidor
Linköping: Linköping University Electronic Press, 2005. , s. 48
Serie
Linköping studies in science and technology. Licentiate thesis, ISSN 0280-7971 ; 1147
Nyckelord [en]
Multicolour printing, Printing process, Colour images, Colour impression, CCD-camera
Nationell ämneskategori
Datorteknik
Identifikatorer
URN: urn:nbn:se:hh:diva-713Lokalt ID: 2082/1062ISBN: 91-85297-25-9 OAI: oai:DiVA.org:hh-713DiVA, id: diva2:237931
Presentation
2005-02-10, 00:00 (Engelska)
Handledare
Anmärkning

Report code: LiU-TEK-LIC-2005:02

Tillgänglig från: 2007-06-04 Skapad: 2007-06-04 Senast uppdaterad: 2018-03-23Bibliografiskt granskad
Delarbeten
1. Unsupervised colour image segmentation applied to printing quality assessment
Öppna denna publikation i ny flik eller fönster >>Unsupervised colour image segmentation applied to printing quality assessment
2005 (Engelska)Ingår i: Image and Vision Computing, ISSN 0262-8856, E-ISSN 1872-8138, Vol. 23, nr 4, s. 417-425Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

We present an option for colour image segmentation applied to printing quality assessment in offset lithographic printing by measuring an average ink dot size in halftone pictures. The segmentation is accomplished in two stages through classification of image pixels. In the first stage, rough image segmentation is performed. The results of the first segmentation stage are then utilized to collect a balanced training data set for learning refined parameters of the decision rules. The developed software is successfully used in a printing shop to assess the ink dot size on paper and printing plates.

Ort, förlag, år, upplaga, sidor
Amsterdam: Elsevier, 2005
Nyckelord
Colour image segmentation, Fuzzy clustering, Quality inspection, Colour printing
Nationell ämneskategori
Datorseende och robotik (autonoma system)
Identifikatorer
urn:nbn:se:hh:diva-259 (URN)10.1016/j.imavis.2004.11.003 (DOI)000227222100005 ()2-s2.0-13444278799 (Scopus ID)2082/554 (Lokalt ID)2082/554 (Arkivnummer)2082/554 (OAI)
Tillgänglig från: 2006-11-24 Skapad: 2006-11-24 Senast uppdaterad: 2018-03-23Bibliografiskt granskad
2. A New method for colour measurements in graphic arts
Öppna denna publikation i ny flik eller fönster >>A New method for colour measurements in graphic arts
1999 (Engelska)Ingår i: Color Research and Application, ISSN 0361-2317, E-ISSN 1520-6378, Vol. 24, nr 3, s. 185-196Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This article presents a method for colour measurements directly on printed half-tone multicoloured pictures. The article introduces the concept of colour impression. By this concept we mean the CMY or CMYK vector (colour vector), which lives in the three- or four-dimensional space of printing inks. Two factors contribute to values of the vector components, namely, the percentage of the area covered by cyan, magenta, yellow, and black inks (tonal values) and ink densities. The colour vector expresses integrated information about the tonal values and ink densities. Values of the colour vector components increase if tonal values or ink densities rise and vice versa. If, for some primary colour, the ink density and tonal value do not change, the corresponding component of the colour vector remains constant. If some reference values of the colour vector components are set from a preprint, then, after an appropriate calibration, the colour vector directly shows how much the operator needs to raise or lower the cyan, magenta, yellow, and black ink densities in order to correct colours of the picture being measured. The values of the components are obtained by registering the RGB image from the measuring area and then transforming the set of registered RGB values to the triplet or quadruple of CMY or CMYK values, respectively. Algorithms based on artificial neural networks are used for performing the transformation. During the experimental investigations, we have found a good correlation between components of the colour vector and ink densities.

Ort, förlag, år, upplaga, sidor
New York: Wiley-Blackwell, 1999
Nyckelord
Colorimetry, Calibration, Color printing, Ink, Neural networks, Vectors, Colour classification, Graphic arts
Nationell ämneskategori
Teknik och teknologier
Identifikatorer
urn:nbn:se:hh:diva-3546 (URN)10.1002/(SICI)1520-6378(199906)24:3<185::AID-COL5>3.0.CO;2-1 (DOI)000079957400003 ()2-s2.0-0032688107 (Scopus ID)
Tillgänglig från: 2010-01-13 Skapad: 2009-12-01 Senast uppdaterad: 2018-03-23Bibliografiskt granskad
3. Intelligent Monitoring of the Offset Printing Process
Öppna denna publikation i ny flik eller fönster >>Intelligent Monitoring of the Offset Printing Process
2004 (Engelska)Ingår i: Proceedings of the IASTED International Conference on Neural Networks and Computational Intelligence, ACTA Press, 2004, s. 173-178Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

In this paper, we present a neural networks and image analysis based approach to assessing colour deviations in an offset printing process from direct measurements on halftone multicoloured pictures--there are no measuring areas printed solely to assess the deviations. A committee of neural networks is trained to assess the ink proportions in a small image area. From only one measurement the trained committee is capable of estimating the actual amount of printing inks dispersed on paper in the measuring area. To match the measured image area of the printed picture with the corresponding area of the original image, when comparing the actual ink proportions with the targeted ones, properties of the 2-D Fourier transform are exploited.

Ort, förlag, år, upplaga, sidor
ACTA Press, 2004
Nyckelord
Neural modelling, Neural network committee, Fourier transform, Offset lithographic printing
Nationell ämneskategori
Datorseende och robotik (autonoma system)
Identifikatorer
urn:nbn:se:hh:diva-19714 (URN)000228458400031 ()2-s2.0-11144340833 (Scopus ID)
Konferens
International Conference on Neural Networks and Computational Intelligence, Grindelwald, 23 - 25 February 2004
Anmärkning

Article number 413-065

Tillgänglig från: 2012-09-24 Skapad: 2012-09-24 Senast uppdaterad: 2018-03-29Bibliografiskt granskad
4. Modelling and Control of the Web-Fed Offset Newspaper Printing Press
Öppna denna publikation i ny flik eller fönster >>Modelling and Control of the Web-Fed Offset Newspaper Printing Press
Visa övriga...
2003 (Engelska)Ingår i: Proceedings of the Technical Association of the Graphic Arts, TAGA, Technical Association of the Graphic (TAGA) , 2003, s. 27-29Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

We present an approach to modelling and controlling the web-fed offset printing process. An image processing and artificial neural networks based device is used to measure the printing process output - the observable variables. The observable variables are measured on halftone areas and integrate information about both ink densities and dot sizes. From only one measurement the device is capable of estimating the actual relative amount of each cyan, magenta, yellow, and black ink dispersed on paper in the measuring area. We build and test linear and non-linear printing press models using the measured variables andother parameters characterising the press. The observable variables measured and the press model developed are then further used by a control unit for generating control signals - signals for controlling the ink keys - to compensate for colour deviation. The experimental investigations performed have shown that the non-linear model developed is accurate enough to be used in a control loop for controlling the printing process. The control accuracy - the tracking accuracy of the desired ink level - obtained from the controller was higher than that observed when controlling the press by the operator.

Ort, förlag, år, upplaga, sidor
Technical Association of the Graphic (TAGA), 2003
Nyckelord
Colour control, Neural network, Newsprint
Nationell ämneskategori
Teknik och teknologier
Identifikatorer
urn:nbn:se:hh:diva-19715 (URN)2-s2.0-1942421673 (Scopus ID)
Konferens
2003 Proceedings-Technical Associations of the Graphic Arts, TAGA, Montreal, Canada
Tillgänglig från: 2012-09-24 Skapad: 2012-09-24 Senast uppdaterad: 2018-03-22Bibliografiskt granskad

Open Access i DiVA

fulltext(5381 kB)1289 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 5381 kBChecksumma MD5
ac909a8cb8297e34be2519c30a4cbe0788ef07457bb2fb8df89ef9ffb20163efd844ab0038bac220c7af29b6473f57d2fcadf78a2003b48c3d0c63ebd8457e482cbca8bc1caa65e3f80867993174ef21
Typ fulltextMimetyp application/pdf

Personposter BETA

Bergman, Lars

Sök vidare i DiVA

Av författaren/redaktören
Bergman, Lars
Av organisationen
Intelligenta system (IS-lab)
Datorteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 1289 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 426 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf