hh.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Towards an Energy Efficient Protocol for Active RFID
Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), Halmstad Embedded and Intelligent Systems Research (EIS), Inbyggda system (CERES).
Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), Halmstad Embedded and Intelligent Systems Research (EIS), Inbyggda system (CERES).
Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), Halmstad Embedded and Intelligent Systems Research (EIS), Inbyggda system (CERES).
Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), Halmstad Embedded and Intelligent Systems Research (EIS), Inbyggda system (CERES).
Visa övriga samt affilieringar
2006 (Engelska)Ingår i: International Symposium on Industrial Embedded Systems, 2006. IES '06, Piscataway, N.J.: IEEE Press, 2006, s. 1-4Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

The use of radio frequency identification systems (RFID) is growing rapidly. Today, mostly "passive" RFID systems are used because no onboard energy source is needed on the transponders. However, "active " RFID with onboard power source gives a new range of opportunities not possible with passive systems. To obtain energy efficiency in an active RFID system a protocol should be designed that is optimized with energy in mind. This paper describes the on-going work of defining and evaluating such a protocol. The protocol's performance in terms of energy efficiency, aggregated throughput, delay, and number of air collisions is evaluated and compared to that of the medium-access layer in 802.15.4 Zigbee, and also to a commercially available protocol from Free2move.

Ort, förlag, år, upplaga, sidor
Piscataway, N.J.: IEEE Press, 2006. s. 1-4
Nyckelord [en]
Protocols, Radiofrequency identification, Transponders
Nationell ämneskategori
Teknik och teknologier
Identifikatorer
URN: urn:nbn:se:hh:diva-2060DOI: 10.1109/IES.2006.357477Scopus ID: 2-s2.0-46149127374Lokalt ID: 2082/2455ISBN: 1-4244-0777-X OAI: oai:DiVA.org:hh-2060DiVA, id: diva2:239278
Konferens
Industrial Embedded Systems, IES '2006, October 18-20, 2006 Antibes Juan-Les-Pins, France
Anmärkning

©2006 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

Tillgänglig från: 2008-10-17 Skapad: 2008-10-17 Senast uppdaterad: 2018-03-23Bibliografiskt granskad
Ingår i avhandling
1. Towards energy efficient protocols for active RFID
Öppna denna publikation i ny flik eller fönster >>Towards energy efficient protocols for active RFID
2007 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

The absence of a global standard is a bottleneck when using Radio Frequency Identification (RFID) technology. This thesis explores data communication protocols for Active-RFID regarding their energy efficiency and how they can be suited to fit a large variety of applications.

The use of Radio Frequency Identification systems (RFID) is growing rapidly. Today mostly "passive" RFID systems are used because no onboard energy source is needed on the transponders. However, "active" RFID technology, with onboard power sources in the transponders, gives a range of opportunities not possible with passive systems. Besides that Active RFID offers longer working distance between RFID-reader and tag than passive RFID, this also enables the tags to do sensor measurements, calculations and storage even when no RFID-reader is in the vicinity of the tags.

To obtain energy efficiency in an Active RFID system the data communication protocol to be used should be carefully designed with energy optimization in mind. This thesis describes how energy consumption can be calculated, to be used in protocol definition, and how evaluation of protocols in this respect can be made. The performance of such a new protocol, in terms of energy efficiency, aggregated throughput, delay, and number of air collisions is evaluated and compared to an existing, commercially available protocol for Active RFID, as well as the IEEE standard 802.15.4 (used e.g. in the Zigbee medium-access layer). Simulations show that, by acknowledging the payload and using deep sleep mode on the tag, the lifetime of a tag is increased.

For all types of protocols using an air channel for transmitting and receiving information it is obvious that the utilization of the channel is maximized when no collisions occur. To avoid and minimize collisions in the air interface it is possible to listen to the channel (carrier sense) and know its status. Knowing that the channel is occupied should result in a back-off and a later retry, instead of persistently listening to the channel which would require constant energy consumption. We further study the effect on tag energy cost and packet delay incurred by some typical back-off algorithms (constant, linear, and exponential) used in a contention based CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) protocols for Active RFID communication. The study shows that by selecting the proper back-off algorithm coefficients (based on the number of tags), i.e. the initial contention window size and back-off interval coefficient, the tag energy consumption and read-out delays can be significantly lowered.

Ort, förlag, år, upplaga, sidor
Göteborg: Chalmers University of Technology, 2007. s. 20
Serie
Technical report. L, ISSN 1652-876X ; 42
Nyckelord
RFID, active RFID, protocol, back-off, carrier sense, energy efficient, wireless networks, active tag, energy consumption
Nationell ämneskategori
Datorteknik
Identifikatorer
urn:nbn:se:hh:diva-1983 (URN)2082/2378 (Lokalt ID)2082/2378 (Arkivnummer)2082/2378 (OAI)
Presentation
(Engelska)
Tillgänglig från: 2008-09-29 Skapad: 2008-09-29 Senast uppdaterad: 2018-02-28Bibliografiskt granskad

Open Access i DiVA

fulltext(1079 kB)399 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 1079 kBChecksumma SHA-512
9d0803da5b716b18dd28785092df70cf0913f6c7e3b8b31818c568db55f6f6109bd4af68045cd75f751de05565523d6187ee5612d637f780a523ce35d3737934
Typ fulltextMimetyp application/pdf

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Nilsson, BjörnBengtsson, LarsBilstrup, UrbanWiberg, Per-ArneSvensson, Bertil

Sök vidare i DiVA

Av författaren/redaktören
Nilsson, BjörnBengtsson, LarsBilstrup, UrbanWiberg, Per-ArneSvensson, Bertil
Av organisationen
Inbyggda system (CERES)
Teknik och teknologier

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 399 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

doi
isbn
urn-nbn

Altmetricpoäng

doi
isbn
urn-nbn
Totalt: 565 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf