hh.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Low Noise Amplifier for radio telescope at 1: 42 GHz
Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE).
Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE).
2007 (Engelska)Självständigt arbete på avancerad nivå (magisterexamen)Studentuppsats (Examensarbete)
Abstract [en]

This is a part of the project “Radio telescope system” working at 1.42 GHz, which includes designing of patch antenna and LNA. The main objective of this thesis is to design a two stage low noise amplifier for a radio telescope system, working at the frequency 1.42 GHz. Finally our aim is to design a two stage LNA, match, connect and test together with patch antenna to reduce

the system complexity and signal loss.

The requirements to design a two stage low noise amplifier (LNA) were well studied, topics including RF basic theory, layout and fabrication of RF circuits. A number of tools are available to design and simulate low noise amplifiers but our simulation work was done using advanced design system (ADS 2004 A). The design process includes selection of a proper device, stability check of the device, biasing, designing of matching networks and layout of total design and fabrication. A lot of time has been

spent on designing of impedance matching network, fabrication and testing of the design circuits and finally a two stage low noise amplifier (LNA) was designed. After the fabrication work, the circuits were tested by the spectrum analyzer in between 9 KHz to 25 GHz frequency range. Finally the resulting noise figure 0.299 dB and gain 24.25 dB are obtained from the simulation.

While measuring the values from the fabricated circuit board, we found that bias point is not stable due to self oscillations in the amplifier stages at lower frequencies like 149 MHz for first stage and 355 MHz for second stage.

Ort, förlag, år, upplaga, sidor
Högskolan i Halmstad/Sektionen för Informationsvetenskap, Data- och Elektroteknik (IDE) , 2007.
Nyckelord [en]
LNA, radio telescope, 1.42 GHz
Identifikatorer
URN: urn:nbn:se:hh:diva-997Lokalt ID: 2082/1358OAI: oai:DiVA.org:hh-997DiVA, id: diva2:238215
Uppsök
teknik
Tillgänglig från: 2007-10-17 Skapad: 2007-10-17 Senast uppdaterad: 2007-10-17

Open Access i DiVA

fulltext(907 kB)6768 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 907 kBChecksumma MD5
4cba98a0cd040a6f61c29a8a4ef0dcafa3e60cffa9b174182b3d2d59dc587c2c7f86cb7266f913bd69c3bceacc83de55b13b5be28c74e28d50c7486c630869d6b1aa017f78e04bbefd0d73dd8295ff76
Typ fulltextMimetyp application/pdf

Av organisationen
Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE)

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 6768 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 1507 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf