FX-correlator 2002 (svensk)Independent thesis Basic level (degree of Bachelor)Oppgave

Abstract [sv]

The purpose of this work has been to continue an earlier project, which aims at a construction of a 2GHz radio wave FX-correlator. The FX-correlation technique is to be used to form a 3D image of a burden surface in a blast furnace. This makes it possible to regulate the production process in a more convenient way, and save up to 10% of the energy used in the blast furnace. Our part was to provide a Digital Signal Processor (DSP) and a PC with necessary software. Construction of additional hardware interface between the DSP and a 250Msps sample unit was also a part of the project. The DSP software handles the communication with the sample unit and performs a Fast Fourier Transformation (FFT) of the data. The result is sent to a PC for further digital signal processing and graphic presentation. The PC environment was constructed in LabView, which is a user friendly and a foreseeable graphic interface towards the user. The FX-correlation is performed within the LabView program. FX-correlation is when two received signals (at the same frequencies) get multiplied in the frequency domain. The result is a phase difference, which is important information when the image shall be created, but the handling of this information is beyond the scope of this project.

sted, utgiver, år, opplag, sider

2002.

Emneord [sv]

DSP, DFT, FFT, sampleboard

Identifikatorer

URN: urn:nbn:se:hh:diva-10196Lokal ID: U5061OAI: oai:DiVA.org:hh-10196DiVA, id: diva2:365310

Uppsök

Technology

Merknad

Denna uppsats kan beställas från arkivet / This paper can be ordered from the archive. Kontakta / Contact: arkivet@hh.seTilgjengelig fra: 2010-11-09 Laget: 2010-11-09bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Av organisasjonen

Søk utenfor DiVA

GoogleGoogle ScholarTotalt: 117 treff